The drawer under the plate is made of MDF 16 and 6 mm. It is very practical to be able to open the scanner at the front during construction and then for possible service and updating.

 

On the right side of the picture you can see a red LED indicating that power is on to the scanner. Green LED indicates film perforation trigger, not absolutely necessary so you can skip it or hide in the box if you want. I leave it to you builders to choose the model of LED small or large, with metal ring around?

 

 

On the back you can see the socket for HDMI / USB / switch / DC-in connectors

(back‐panel‐contacts.stl)

 

There are hinges on the back, there are many different models, choose something suitable.

 

Coloring of the plate and the box can be chosen according to your own taste, but the plate should be in some light color so you see that it is clean