T-Scann 8 - project page
Super 8 / Regular 8 film scanner
This knob locks the lens plate M6 X 25
This knob adjusts the height of the lens
M2 X 12 or M2.5 X 12 and nut 2 pcs. The camera should only be attached to the top. It should be movable at the bottom
M2 and 2.5 screws can be difficult to get hold of, hobby shops usually have such.
In Sweden electrokit.com has M2 screws
M6X10 and M6X25
Glue the bolt to the knob
Press in an M6 nut and glue.
Glue red marked surfaces with Super Epoxy and press into the notch on the plate
Press in an M6 nut